CONSTRUCTIVE AND ENGINEERING SOLUTIONS FOR A TOP-COMBUSTION SOLID-FUEL BOILER FOR LOCAL HEATING SYSTEMS
DOI:
https://doi.org/10.37406/2706-9052-2026-2-20Keywords:
solid fuel boiler, top combustion, biomass, firewood fuel, local heating systems, simplified manufacturingAbstract
The paper considers constructive and engineering solutions for a top-combustion solid-fuel boiler intended for use in local heating systems. The operating principle of long-burning candle-type boilers is analysed, and their main structural features are generalised. Based on this analysis, a solid-fuel boiler design is proposed that is focused on simplified manufacturing, the use of readily available materials, and minimisation of the number of structural elements and welded joints. A schematic representation of the boiler operating principle is presented, the main structural components are described, and the principal stages of manufacturing are outlined. The proposed design incorporates an upper air supply system with a movable distributor positioned above the fuel layer. This arrangement is intended to provide controlled air supply to the active combustion zone as the fuel charge is gradually consumed. An internal screen separates the zone of gaseous product formation from the main heat-exchange volume and creates conditions for combustion of gaseous products of thermal decomposition. Tubular heat-exchange elements are arranged in the flow path of hot combustion products to facilitate heat transfer to the heat carrier. A preliminary assessment of the energy potential of the proposed boiler is performed based on the lower heating value and mass of the firewood charge. The obtained relationships connect the fuel load, its energy potential, and the expected operating duration at a single fuel load. The calculated estimates are considered preliminary, since the actual useful heat output, thermal efficiency, fuel consumption rate, flue gas temperature, and other heat-balance parameters require experimental determination. The proposed design may represent a technically feasible alternative to commercially manufactured long-burning boilers for local heating systems, subject to further experimental validation of its thermal performance and operating characteristics.
References
Basu P. Biomass Gasification and Pyrolysis: Practical Design and Theory. London: Academic Press, 2010. 376 p. https://doi.org/10.1016/C2009-0-20099-7.
Bialkovska O., Huk Ya. Economic mechanisms for stimulating the use of alternative energy sources. Scientific Research: Modern Challenges and Future Prospects. Munich: MDPC Publishing, 2024. P. 309–315.
Hutsol T., Glowacki S., Mudryk K. Agrobiomass of Ukraine – Energy Potential of Central and Eastern Europe (Engineering, Technology, Innovation, Economics). Monograph. Warsaw, 2021. 136 p. https://doi.org/10.22630/SGGW.IIM.9788382370201.
International Energy Agency. Unlocking the Potential of Distributed Energy Resources: Power System Opportunities and Best Practices. Paris: OECD Publishing, 2022. 116 p. https://doi.org/10.1787/a2ed7a25-en.
Knoef H. Handbook Biomass Gasification. 2nd ed. Enschede: BTG Biomass Technology Group, 2012. 509 p. ISBN 978-90-819385-0-1.
McKendry P. Energy production from biomass (part 2): conversion technologies. Bioresource Technology. 2002. Vol. 83, No. 1. P. 47–54. https://doi.org/10.1016/S0960-8524(01)00119-5.
Munir A., Alvi J. Z., Ashfaq S., Ghafoor A. Performance evaluation of a biomass boiler on the basis of heat loss method and total heat values of steam. Pakistan Journal of Agricultural Research. 2014. Vol. 51, No. 1. P. 209–215.
Nunes L. J. R., Matias J. C. O., Catalão J. P. S. Wood pellets as a sustainable energy alternative in Portugal. Renewable Energy. 2016. Vol. 85. P. 1011–1016. https://doi.org/10.1016/j.renene.2015.07.065.
Obernberger I., Thek G. Combustion and Gasification of Solid Biomass for Heat and Power Production in Europe – State-of-the-Art and Relevant Future Developments. Proceedings of the 8th European Conference on Industrial Furnaces and Boilers (INFUB 8). Vilamoura, Portugal, 2008. ISBN 978-972-99309-3-5.
Rozkosz A., Yermakov S. Torrefaction laboratory in Kamianets-Podilskyi as a key place on the map of decarbonisation in Europe. Alternative Energy Sources in the Context of Green Economy Development. Kamianets-Podilskyi: PDATU, 2025. P. 8–11.
Saidur R., Abdelaziz E. A., Demirbas A., Hossain M. S., Mekhilef S. A review on biomass as a fuel for boilers. Renewable and Sustainable Energy Reviews. 2011. Vol. 15, No. 5. P. 2262–2289. https://doi.org/10.1016/j.rser.2011.02.015.
Stropuva. Solid Fuel Boiler for Central Heating STROPUVA: Technical Passport, Installation and Maintenance Instructions. Lithuania: Stropuva. [Online]. URL: https://stropuva.lt/wp-content/uploads/2017/12/Instrukcija-angliska.pdf.
Van Loo S., Koppejan J. The Handbook of Biomass Combustion and Co-firing. London: Earthscan, 2008. 464 p. https://doi.org/10.4324/9781849773041.
Гук Я. В., Бялковська О. А. Можливості та виклики для зеленої енергетики в Україні на прикладі енергії біомаси. Електроенергетика, електромеханіка та технології в АПК. Харків : Державний біотехнологічний університет, 2024. С. 70–71.
Гуцол Т., Єрмаков С., Rozkosz A. Торефікація як спосіб покращення споживацьких характеристик біомаси. Аграрна наука та освіта в умовах євроінтеграції. 2019. С. 21–23.
Єрмаков С. В., Кучер О. В., Пустова З. В. Огляд найкращих доступних технологій спалювання твердих палив. Молодь і індустрія 4.0 в XXI столітті. Харків: ДБТУ, 2023. С. 165.
Єрмаков С. Особливості спалювання торефікованої біомаси. Альтернативні джерела енергії в контексті розвитку «зеленої» економіки, 23 трав. 2024 р. Кам’янець-Подільський: ЗВО «ПДУ», 2024. С. 37–39.
Єрмаков С., Lada A. Торефікація як інструмент покращення енергетичних властивостей рослинної біомаси. Modern Technologies and Technical Service: Challenges and Opportunities. Кам’янець-Подільський, 2025. С. 244–248.
Кучер О. В., Єрмаков С. В. Методологія маркетингових досліджень біоекономічних процесів. Подільський вісник: сільське господарство, техніка, економіка. 2023. Вип. 1 (38). С. 132–139. https://doi.org/10.37406/2706-9052-2023-1.19.
